DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Pioneer VSX-T49X, no pre-amp out. (https://www.diybanter.com/electronics-repair/304921-pioneer-vsx-t49x-no-pre-amp-out.html)

David Farber June 15th 10 11:30 PM

Pioneer VSX-T49X, no pre-amp out.
 
If you feed a signal into the L,R power amp inputs of this
Pioneer VSX-T49X, the speaker output is fine. However there is no pre-out
signal on
any channel on any source. I did a system reset but still no output. Is
there someone familiar with this set that knows of likely faults or
modifications that need to be performed?

Thanks for your reply.

--
David Farber
David Farber's Service Center
L.A., CA



Mark Zacharias[_2_] June 16th 10 01:10 AM

Pioneer VSX-T49X, no pre-amp out.
 
"David Farber" wrote in message
. ..
If you feed a signal into the L,R power amp inputs of this
Pioneer VSX-T49X, the speaker output is fine. However there is no pre-out
signal on
any channel on any source. I did a system reset but still no output. Is
there someone familiar with this set that knows of likely faults or
modifications that need to be performed?

Thanks for your reply.

--
David Farber
David Farber's Service Center
L.A., CA


Would a service manual help? Or have you one already?

Mark Z.


David Farber June 16th 10 03:17 AM

Pioneer VSX-T49X, no pre-amp out.
 
Mark Zacharias wrote:
"David Farber" wrote in message
. ..
If you feed a signal into the L,R power amp inputs of this
Pioneer VSX-T49X, the speaker output is fine. However there is no
pre-out signal on
any channel on any source. I did a system reset but still no output.
Is there someone familiar with this set that knows of likely faults
or modifications that need to be performed?

Thanks for your reply.

--
David Farber
David Farber's Service Center
L.A., CA


Would a service manual help? Or have you one already?

Mark Z.



Hi Mark,

Yes, I think a service manual would help immensely.

Thanks!

--
David Farber
David Farber's Service Center
L.A., CA




All times are GMT +1. The time now is 02:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter