DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   NOISY Whirlpool Dehumidifier (https://www.diybanter.com/electronics-repair/302715-noisy-whirlpool-dehumidifier.html)

[email protected] May 7th 10 02:19 PM

NOISY Whirlpool Dehumidifier
 
Hi,

I bought a Whirlpool model AD50DSS2 dehumidifier. It is a very NOISY
(vibration noise) dehumidifier!

A service man came. He thought he fixed it, but later the NOISE was
back.

The dehumidifier's cabinet "amplifies" the compressor's vibration. A
call to Whirlpool was no help at all.

I am a ham radio operator and found out from other hams that I am not the
only one that has a NOISY Whirlpool dehumidifier.

I would like to hear from others with the same problem.

Thank You in Advance, John N3AOF

PS, Remove "ine" from my email address


William Sommerwerck May 7th 10 02:48 PM

NOISY Whirlpool Dehumidifier
 
What about putting something heavy on the dehumidifier to dampen the sound?

About a year ago I considered buying a dehumidifier for my garage. After
searching the Web for reviews, I discovered that all dehumidifiers, from any
manufacturer, are pretty much junk. (Ditto for toaster-ovens, but that's
another matter.)



[email protected] May 7th 10 05:19 PM

NOISY Whirlpool Dehumidifier
 
On Fri, 7 May 2010 06:48:57 -0700, "William Sommerwerck"
wrote:

What about putting something heavy on the dehumidifier to dampen the sound?

About a year ago I considered buying a dehumidifier for my garage. After
searching the Web for reviews, I discovered that all dehumidifiers, from any
manufacturer, are pretty much junk. (Ditto for toaster-ovens, but that's
another matter.)


Just assume that you're buying a device with a two year life and get
the best deal you can.

Although some of the LG models now have a 5 year warranty...

John
dehumidifier in the basement with a condensate pump to move the water
- because it runs year-round in Georgia

GregS[_3_] May 7th 10 05:26 PM

NOISY Whirlpool Dehumidifier
 
In article , wrote:
On Fri, 7 May 2010 06:48:57 -0700, "William Sommerwerck"
wrote:

What about putting something heavy on the dehumidifier to dampen the sound?

About a year ago I considered buying a dehumidifier for my garage. After
searching the Web for reviews, I discovered that all dehumidifiers, from any
manufacturer, are pretty much junk. (Ditto for toaster-ovens, but that's
another matter.)


Just assume that you're buying a device with a two year life and get
the best deal you can.

Although some of the LG models now have a 5 year warranty...

John
dehumidifier in the basement with a condensate pump to move the water
- because it runs year-round in Georgia


My LG dehumidifier goes on and off every so often to make it sickening.
There is no way to stop it doing that except pull the plug.
Thats what I did when i got air conditioning.

greg

Cydrome Leader May 7th 10 05:35 PM

NOISY Whirlpool Dehumidifier
 
William Sommerwerck wrote:
What about putting something heavy on the dehumidifier to dampen the sound?


or jam some rolled up/folded cardboard wherever you can to make parts
vibrate less. This hack works on machinery with vibrating panels or other
parts that make noise even louder.

Adrian C May 7th 10 05:39 PM

NOISY Whirlpool Dehumidifier
 
On 07/05/2010 14:19, wrote:
Hi,

I bought a Whirlpool model AD50DSS2 dehumidifier. It is a very NOISY
(vibration noise) dehumidifier!

A service man came. He thought he fixed it, but later the NOISE was
back.

The dehumidifier's cabinet "amplifies" the compressor's vibration. A
call to Whirlpool was no help at all.


Could it be possible to build a large baffle box about it using sheets
of MDF constructed so to avoid a direct path between the unit and
outside. Bit like constructing a large phat-box speaker cabinet with a
damping line? Obviously want to avoid the MDF getting wet.

Also, sticking sheets of bitumous deadening material on the case - sort
used stuck to automotive body panels - would probably help.

Finally, securing the compressor on anti-vibration mounts might be
possible, or improving the isolation it already has.

Also ...

I note this questions has been posted by the OP on many non-subject
related newsgroups and has had some similar answers, to which there has
been no response. I fear, but hope not, that he just wants to complain
and do nothing else.

The point is Radio Hams *don't* do nothing else. By their very nature,
they get right in there and tinker it, MODIFY it, even BEAT it - until
it works ....

--
Adrian C

William R. Walsh[_2_] May 7th 10 06:03 PM

NOISY Whirlpool Dehumidifier
 
Hi!

It seems that all new dehumidifiers are junk. I don't know. I have two
vintage units--one a Ward's Signature brand and the other a Sears
Coldspot--that are going on 40 years old now and still work perfectly.
(The Signature lost its low fan speed about ten years ago, but who
cares? Who would blame it? The Sears unit has only needed a new fan
motor...while the overflow cutoff is bad, it empties into a drain and
I don't care about the long defunct neon "full" indicator.)

As to your problem...check the rubber mounts on which the compressor
lives. There should be four or so between each "foot" of the
compressor and the frame of the unit. If those seem to be OK (and the
fasteners are reasonably tight), check the fan motor and its blades.
The motor could be loose or the fan blades might be hitting something.

If you can, try to run the unit with the cover or grille(s) off to see
what is making the sound. Exercise caution before touching anything
inside to see if you can change or eliminate the rattle.

William


All times are GMT +1. The time now is 03:15 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter