Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Extech AC/DC Clamp Meter Offset
I have an Extech 380652 that seems to work well in general but has
an approximately 0.06 A offset in the AC Amps mode on the 20 A range. The user offset adjust pot only works on DC Amps. Does anyone know if any of the 3 pots inside are for the AC amps offset? Thanks! -- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/ Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/ +Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm | Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html Important: Anything sent to the email address in the message header above is ignored unless my full name AND either lasers or electronics is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Greenlee DC clamp meter, need schematic or cal procedure | Electronics Repair | |||
clamp meter to tell if someone's got a heater on? | UK diy | |||
Amprobe Clamp Meter Recall | Home Ownership | |||
Amprobe Clamp Meter Recall | Home Repair | |||
cable clamp on meter base and service panel | Home Repair |