Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Pzieoelectic sensor failure modes
Hi,
I'm using a piezoelectric sensor to measure pressure (changes, of course : ) in a relatively high frequency (a few hundred hertz) high dynamic range (0 - 25,000 lbs percussive loading) application. I'm wondering what types of failures I can expect to see and schemes to alleviate them. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Pzieoelectic sensor failure modes
D Yuniskis wrote in message
... Hi, I'm using a piezoelectric sensor to measure pressure (changes, of course : ) in a relatively high frequency (a few hundred hertz) high dynamic range (0 - 25,000 lbs percussive loading) application. I'm wondering what types of failures I can expect to see and schemes to alleviate them. Do the test items themselves involve failure and shock waves? I used to work where we did destructive, up to 50 ton, testing of beams etc and we had these neat looking but useless loadcells with built in LCD displays that could not take the conducted shockwaves at failure. -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
PIR sensor failure modes | UK diy | |||
1992 19" Zenith squealing, strange failure modes | Electronics Repair | |||
failure modes of shellac | Woodworking | |||
water pressure reducing valve failure modes? | Home Repair | |||
gas hob flame failure sensor problems | UK diy |