Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
LC-15SH7U Button Question
I have a Sharp LC-15SH7U that took a power surge & went dead. After
fixing a shorted zener diode in the 33V power supply & a shorted dual fet in the backlight inverter the tv powers up just fine & has a normal picture but now the top six buttons don't work properly. Power works properly Menu, Input, & Volume Down don't work at all. Volume Up works as Volume Down. Channel Down works as Volume Up. Channel Up works as Channel Down. Button order is Menu, Vol down, Vol up, Chn down, Chn up, Input, Power. It has a four wire interface to the main board. I haven't traced the circuit out yet, but a quick glance shows all switches are connected to pin 1. I imagine the other three pins work a set of buttons each, but I'm not sure. Is this a common configuration for Sharp TV's? I haven't been able to find any service info for this TV, so I'm sure I'll have to start tracing. Thanks for any help, Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sharp LC-15SH7U Service Manual | Electronics Repair | |||
Oil burner reset button | Home Repair | |||
Button Capacitor 47,000uF 5V | Electronics Repair |