Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.antiques.radio+phono,sci.electronics.repair
|
|||
|
|||
Reading old capacitor values
Mike wrote in message
... In the back of Vol. 2 of the RSGB Radio Communication Handbook it shows two types of ceramic caps. The first has axial leads and the first color band is wider and is TC then 1st, 2nd, M, T. The other has radial leads and has a dot for the tip then 1st, 2nd, M, T. I have seen some old small block caps just marcked with pF values. Mike AA8W "N_Cook" wrote in message ... British 1940s components that are driving me dotty Small rod types with body/end/dot colours red/red/green orange/orange/green yellow/purple/yellow brown/black/brown what meaning to the yellow and green multiplier dots ? and Hunts make, brown cased small block, flat leads, with code oc/3100 impressed into the encapsulation none of them measuring anything like I think the colours/codes mean -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ The broken one, a bit of the paint with the green spot , broken away. Body and end blob , both orange, presumably 33pF http://home.graffiti.net/diverse:gra.../puffy_cap.jpg ruler 0.1 inch markings, solid black core material -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
#2
Posted to rec.antiques.radio+phono,sci.electronics.repair
|
|||
|
|||
Reading old capacitor values
N_Cook wrote:
The broken one, a bit of the paint with the green spot , broken away. Body and end blob , both orange, presumably 33pF http://home.graffiti.net/diverse:gra.../puffy_cap.jpg ruler 0.1 inch markings, solid black core material -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ This thread must have taken a turn that I missed. The device in the photo sure looks like a resistor !?! -Bill |
#3
Posted to rec.antiques.radio+phono,sci.electronics.repair
|
|||
|
|||
Reading old capacitor values
Bill M wrote in message
... N_Cook wrote: The broken one, a bit of the paint with the green spot , broken away. Body and end blob , both orange, presumably 33pF http://home.graffiti.net/diverse:gra.../puffy_cap.jpg ruler 0.1 inch markings, solid black core material -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ This thread must have taken a turn that I missed. The device in the photo sure looks like a resistor !?! -Bill My first thought on seeing that solid black core, expecting tubes if caps. But all of that size and format measured over 30M ohm, if resistors, and that broken one 500 Meg on an insulation tester. Also very small physical size , for the time, if they were resistors. Anyone interested in a microscope view of that core?, i could take such a pic, or any suggestions for chemistry test ? -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
#4
Posted to rec.antiques.radio+phono,sci.electronics.repair
|
|||
|
|||
Reading old capacitor values
N_Cook wrote:
My first thought on seeing that solid black core, expecting tubes if caps. But all of that size and format measured over 30M ohm, if resistors, and that broken one 500 Meg on an insulation tester. Also very small physical size , for the time, if they were resistors. Anyone interested in a microscope view of that core?, i could take such a pic, or any suggestions for chemistry test ? Thats a new on for me. So what forms the two sides of the capacitor? Is there any sort of plating on the black core underneath the paint? -Bill |
#5
Posted to rec.antiques.radio+phono,sci.electronics.repair
|
|||
|
|||
Reading old capacitor values
Bill M wrote in message
... N_Cook wrote: My first thought on seeing that solid black core, expecting tubes if caps. But all of that size and format measured over 30M ohm, if resistors, and that broken one 500 Meg on an insulation tester. Also very small physical size , for the time, if they were resistors. Anyone interested in a microscope view of that core?, i could take such a pic, or any suggestions for chemistry test ? Thats a new on for me. So what forms the two sides of the capacitor? Is there any sort of plating on the black core underneath the paint? -Bill The paint is laid directly on the black stuff. In a x30 microscope it has a slightly porous structure like scaled down clinker but not regular fine structure like ferrite slugs. Some ceramic type materials used in 1954 reference for capacitor construction were Clineonstatite, Magnesium Titanate, Rutile, Strontium Titanate, Barium Titanate, Barium-strontium titanate. But what any of them look like I've no idea. -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reading old capacitor values | Electronics Repair | |||
Help Guessing at Capacitor Values.. | Electronics Repair | |||
ESR reading?Good/ BAD ESR value? surface mount capacitor cause ripple wavy LCD? | Electronics Repair | |||
Home SALES values -vs- ASSESSED values? | Home Ownership | |||
Reading capacitance on SM capacitor | Electronics Repair |