Re-solder FBT -safety concern
 

Hi,
my Panasonic Quintrix F 24" TV keeps stretching the display in the
horizontal direction (objects became fatter).
I was told that re-solder FBT section may solve the problem. I can
reach the solder side without disconnecting the anode from the tube.
My concern is should I discharge the anode & AC input filter capacitor
before proceeding?

Thanks in advance
ck

Re-solder FBT -safety concern
 

writes:

Hi,
my Panasonic Quintrix F 24" TV keeps stretching the display in the
horizontal direction (objects became fatter).
I was told that re-solder FBT section may solve the problem. I can
reach the solder side without disconnecting the anode from the tube.
My concern is should I discharge the anode & AC input filter capacitor
before proceeding?

You don't need to discharge the CRT before soldering the FBT.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.