 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair, alt.building.construction, sci.electronics.repair
|
|||
|
|||
thermostat setting
My thermostat runs my furnace about once every hour when it is 20
degrees and I am thinking about adjusting the swing on the thermostat to a lower number so that the system keeps a more consistent temp. Is this going to cost me more in gas. The swing will allow the system (set at 62 for heat) to come on at 61 and run it up to 63. So the swing is 3 degrees. I figure I might go to 2 or one to cycle the system more and be more consistent temp. Any thoughts? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| condensing boiler thermostat setting | UK diy | |||
| Setting inside thermostat? | Home Repair | |||
| boiler thermostat setting | UK diy | |||
| Thermostat setting? | Home Repair | |||
| boiler thermostat setting | UK diy | |||
Threaded Mode
