Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#9
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
"Mr. Land" wrote in message
... Assuming you are soliciting opinions on this... It seems to me that the answer to the question: "Which is more important, a thorough understanding of electronics or a great deal of experience?" depends upon the stated goal. That wasn't exactly the issue. It was really "How in the name of heaven does someone resolve a problem when the defective component has no apparent connection with the problem?" If the goal is to (eventually) be able to troubleshoot and repair anything that comes in the door, then I would cast my vote for technical knowledge. For instance, in the case of the OP's problem, it would seem to me that if poor solder joints on the tuner shielding are really the problem, given a thorough understanding of how all the circuitry works, one should be able to use a scope to examine signals at various points and eventually ascertain that the tuner's output is floating or whatever. (This is just an example, let's not get into issues about whether or not one can probe into a tuner and even see the actual signals.) So let's say for example it took 2 hours of troubleshooting to find it. In this case, why should bad solder joints on the tuner case produce these visible effects? All the book-learning is not going to help much. OK, so now let's say that the goal is to be able to quickly and profitably repair the majority of products customers are likely to have - then it would seem that experience would be at least, if not more, important. If I get 10 sets in a row like the OP's, and I have a less thorough electronics background, it might take me 3 or 4 hours to fix the first one. But I'll be able to repair the next 9 in 1/2 hour. My attitude -- as a degreed EE -- is that I want to _understand_ what the problem is. But it can take hours to figure out exactly what's going on. Often, intelligent shot-gunning will get the unit up and running far faster than meticulous analysis. Any successful service tech has to get those sets in and out quickly if he's going to stay in business. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Diagnosing AC that won't run | Home Repair | |||
A little diagnosing a Zenith VR-3300 | Electronics Repair | |||
Diagnosing problem with 3-way switches | Home Repair | |||
Diagnosing/repairing an oven | UK diy | |||
need help diagnosing TV problem - JVC AV 27920 | Electronics Repair |