 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Phaser 6100 fuser cold
I picked up a Xerox Phaser 6100 which starts the warmup cycle and then fails
with a fuser low temp error. I've only done a quick check so far and verified that the fuser is stone cold. Before I tear into it, does anyone know if there's a common problem with these? I'm thinking so far either fuser lamp or a triac on the control board but if I'm barking up the wrong tree let me know. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| location 24cxx EEprom for Password and LCD settings on Omnibook 6100 | Electronics Repair | |||
| Xerox Tektronix Phaser 840 850 860 8200 Service Manuals here | Electronics Repair | |||
| WTD: Omnibook 6100 Eeprom updating disk for LCD. | Electronics Repair | |||
| NO POWER on Toshiba Satellite Pro 6100 | Electronics Repair | |||
| Tektronics phaser 350 printer | Electronics Repair | |||
Threaded Mode
