splice a new power cord to an HP keyboard
 

I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.
fjell

splice a new power cord to an HP keyboard
 

wrote in message
ups.com...
I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.
fjell


Sure if you can figure out the pinout of the cable, it may be labeled on the
board inside the keyboard. There may be a good reason the cord was chopped
off though.

splice a new power cord to an HP keyboard
 

"James Sweet" writes:

wrote in message
ups.com...
I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.

Sure if you can figure out the pinout of the cable, it may be labeled on the
board inside the keyboard. There may be a good reason the cord was chopped
off though.

Also, make sure it's a line cord - 115 VAC - not from a missing adapter
(though if it is hard-wired, this is unlikely).

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.

splice a new power cord to an HP keyboard
 

"Sam Goldwasser" wrote in message
...
"James Sweet" writes:

wrote in message
ups.com...
I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.

Sure if you can figure out the pinout of the cable, it may be labeled on
the
board inside the keyboard. There may be a good reason the cord was
chopped
off though.

Also, make sure it's a line cord - 115 VAC - not from a missing adapter
(though if it is hard-wired, this is unlikely).

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above
is
ignored unless my full name AND either lasers or electronics is included
in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.


Did I miss something? I thought this was a computer keyboard not a musical
keyboard.

splice a new power cord to an HP keyboard
 

"Michael Kennedy" writes:

"Sam Goldwasser" wrote in message
...
"James Sweet" writes:

wrote in message
ups.com...
I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.

Sure if you can figure out the pinout of the cable, it may be labeled on
the
board inside the keyboard. There may be a good reason the cord was
chopped
off though.

Also, make sure it's a line cord - 115 VAC - not from a missing adapter
(though if it is hard-wired, this is unlikely).

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/

Did I miss something? I thought this was a computer keyboard not a musical
keyboard.

No, probably not. :) Just not paying attention. That happens sometimes.....

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.

splice a new power cord to an HP keyboard
 

Just imagine, some guy taking a PC keyboard and hooking it up to 115v (or in
sa, 240v).
That would be interesting. More interesting if it is still plugged into his
PC at the time. ;-)

P


Did I miss something? I thought this was a computer keyboard not a
musical
keyboard.

No, probably not. :) Just not paying attention. That happens
sometimes.....

splice a new power cord to an HP keyboard
 

On Oct 9, 7:25 pm, wrote:
I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.
fjell

Can't you ****ing idiots learn how to use Google?

splice a new power cord to an HP keyboard
 

On Oct 13, 10:45 am, "Peter K" wrote:
Just imagine, some guy taking a PC keyboard and hooking it up to 115v (or in
sa, 240v).
That would be interesting. More interesting if it is still plugged into his
PC at the time. ;-)

P



Did I miss something? I thought this was a computer keyboard not a
musical
keyboard.

No, probably not. :) Just not paying attention. That happens
sometimes.....- Hide quoted text -

- Show quoted text -

http://www.youtube.com/watch?v=lTW7vEKMiqs

splice a new power cord to an HP keyboard
 

Man, I gotta try that.
with 240v in South Africa, it ought to be even more fantastic. (Maybe I will
try on a 3 Phase Supply [400v])
P.


http://www.youtube.com/watch?v=lTW7vEKMiqs

"

splice a new power cord to an HP keyboard
 

"Lynn" wrote in message
ups.com...
On Oct 9, 7:25 pm, wrote:
I bought a used HP keyboard at a yard sale to replace the one I'm
using now. it has a small pig tail where the input cord was chopped
off and I would like to splice an input cord from an old keyboard in
my junk box to this HP.
Can it be done and will a good splice fix it so it will work?
Thank you for your time.
fjell

Can't you ****ing idiots learn how to use Google?


Typically people say "Use Google" when you are looking for eaisly available
info on the web. Although rewiring a keyboard may be common knowledge to
anyone who works on electronics, it is not exactly something you would find
on google eaisly.

Now lets say someone says.. "Post a color code chart for resistor values."
Then I would tell the person to Google.

splice a new power cord to an HP keyboard