DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Dead LCD inverter for 7 inch portable DVD player - help with replacement (https://www.diybanter.com/electronics-repair/214932-dead-lcd-inverter-7-inch-portable-dvd-player-help-replacement.html)

NuttingCDEF September 18th 07 09:45 PM

Dead LCD inverter for 7 inch portable DVD player - help with replacement
 
Can anyone tell me where I can find a replacement LCD inverter for a
portable DVD player?

The player is a Yamada / UMax PDiX-770

The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
manufactured by AU Optronics

The (dead) inverter has no part number on it that I can trace on the
web - the only markings that begin to look like a part number are "TDF
0435"

The input is 3-pin

I'd probably just go ahead and try a generic LCD inverter except that
I can't see one that is on a suitable sized board - the DVD player is
cramped for space (unsurprisingly) - the existing inverter is about
103mm long / 13mm wide / 4mm high - there might be room in the case
for something marginally bigger, but not much!

Any help gratefully received.

NuttingCDEF


Arfa Daily September 19th 07 12:35 AM

Dead LCD inverter for 7 inch portable DVD player - help with replacement
 

"NuttingCDEF" wrote in message
ups.com...
Can anyone tell me where I can find a replacement LCD inverter for a
portable DVD player?

The player is a Yamada / UMax PDiX-770

The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
manufactured by AU Optronics

The (dead) inverter has no part number on it that I can trace on the
web - the only markings that begin to look like a part number are "TDF
0435"

The input is 3-pin

I'd probably just go ahead and try a generic LCD inverter except that
I can't see one that is on a suitable sized board - the DVD player is
cramped for space (unsurprisingly) - the existing inverter is about
103mm long / 13mm wide / 4mm high - there might be room in the case
for something marginally bigger, but not much!

Any help gratefully received.

NuttingCDEF


You could try looking at

http://www.lcdpart.com/doc/ccfl.html

Arfa



JANA September 19th 07 04:21 AM

Dead LCD inverter for 7 inch portable DVD player - help with replacement
 
Get in touch with the manufacture, and enquire who is their part distributor
for your area. You can then order parts from them.

--

JANA
_____


"NuttingCDEF" wrote in message
ups.com...
Can anyone tell me where I can find a replacement LCD inverter for a
portable DVD player?

The player is a Yamada / UMax PDiX-770

The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
manufactured by AU Optronics

The (dead) inverter has no part number on it that I can trace on the
web - the only markings that begin to look like a part number are "TDF
0435"

The input is 3-pin

I'd probably just go ahead and try a generic LCD inverter except that
I can't see one that is on a suitable sized board - the DVD player is
cramped for space (unsurprisingly) - the existing inverter is about
103mm long / 13mm wide / 4mm high - there might be room in the case
for something marginally bigger, but not much!

Any help gratefully received.

NuttingCDEF



JW September 19th 07 10:38 AM

Dead LCD inverter for 7 inch portable DVD player - help with replacement
 
On Tue, 18 Sep 2007 13:45:42 -0700 NuttingCDEF
wrote in Message id:
. com:

Can anyone tell me where I can find a replacement LCD inverter for a
portable DVD player?

The player is a Yamada / UMax PDiX-770

The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
manufactured by AU Optronics


I posted this link about a month ago. These folks have your inverter:
http://www.ergpower.com/pdf30/cross.pdf

NuttingCDEF September 20th 07 11:11 AM

Dead LCD inverter for 7 inch portable DVD player - help with replacement
 
Thanks for the link. The inverter for the A070FW03 panel is listed as
D8md60J2. However, in the web store part of their site, the data
sheet gives the dimensions of that inverter as 20.1mm x 90.9mm x 8mm.
While electrically it is probably bang on, my problem is that it is
significantly too wide / high to fit in the slot in the case. I'll
contact them to see if they do anything else that might work, but any
other suggestions anyone can make would be helpful.


On 19 Sep, 10:38, JW wrote:
On Tue, 18 Sep 2007 13:45:42 -0700 NuttingCDEF
wrote in Message id:
. com:

Can anyone tell me where I can find a replacement LCD inverter for a
portable DVD player?


The player is a Yamada / UMax PDiX-770


The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
manufactured by AU Optronics


I posted this link about a month ago. These folks have your inverter:http://www.ergpower.com/pdf30/cross.pdf





All times are GMT +1. The time now is 08:04 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter