Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 103
Default Schematic help needed

Before trying Pioneer, I am hoping someone in this group may have a
schematic for a Pioneer model PRO97. Set is going into shutdown, but
can be made to stay powered up by removing the Vert Ret wire from the
convergence board. Already replaced the STK-4274, no change. I'm not
sure of this wire's function, but a schematic would help me
trenmendously. Thanks group.

  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 265
Default Schematic help needed

Email me privately and remind me to check when I get tothe shop on Monday.
I am pretty sure that I have the service manual and I can scan part of the
schematic for you. Pioneer manuals are ridiculous.

use my first name AT electronics DASH world DOT net

"Golf" wrote in message
oups.com...
Before trying Pioneer, I am hoping someone in this group may have a
schematic for a Pioneer model PRO97. Set is going into shutdown, but
can be made to stay powered up by removing the Vert Ret wire from the
convergence board. Already replaced the STK-4274, no change. I'm not
sure of this wire's function, but a schematic would help me
trenmendously. Thanks group.



  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 33
Default Schematic help needed

On Aug 25, 5:05 am, "Leonard Caillouet" wrote:
Email me privately and remind me to check when I get tothe shop on Monday.
I am pretty sure that I have theservicemanual and I can scan part of the
schematic for you. Pioneermanualsare ridiculous.

use my first name AT electronics DASH world DOT net

"Golf" wrote in message

oups.com...

Before trying Pioneer, I am hoping someone in this group may have a
schematic for a Pioneer model PRO97. Set is going into shutdown, but
can be made to stay powered up by removing the Vert Ret wire from the
convergence board. Already replaced the STK-4274, no change. I'm not
sure of this wire's function, but a schematic would help me
trenmendously. Thanks group.


http://www.justmanuals.com

  #4   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 103
Default Schematic help needed

On Aug 25, 4:05 am, "Leonard Caillouet" wrote:
Email me privately and remind me to check when I get tothe shop on Monday.
I am pretty sure that I have the service manual and I can scan part of the
schematic for you. Pioneer manuals are ridiculous.

use my first name AT electronics DASH world DOT net

"Golf" wrote in message

oups.com...


Thankyou for the offering Leonard. I went to work on this set the day
after the post, got fed up and googled again for it. Found the service
manual for $25.00 and bought it. Probably should have checked my post
first, but previous post didn't draw a bite. Should have did this
weeks ago since I think I already know what's wrong with the set after
looking over the schematics. I will post a follow up once repaired.
Thanks again.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Schematic for TCP202 Needed Aron \(bacsdesign.com\) Electronics Repair 1 July 21st 07 03:44 AM
Toshiba schematic needed Golf Electronics Repair 2 November 23rd 05 04:28 AM
schematic needed [email protected] Electronics Repair 0 September 9th 05 06:48 PM
rca victrola schematic needed chip Electronics Repair 0 February 14th 05 05:58 AM
Magnavox VCR schematic or help needed Don Wall Electronics Repair 2 December 30th 04 02:40 AM


All times are GMT +1. The time now is 09:05 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"