DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   akai amp (https://www.diybanter.com/electronics-repair/205548-akai-amp.html)

Patt July 4th 07 11:21 PM

akai amp
 
On the back of this amp (Akai AM-V04), is two plugins. One says switched the
other unswitched. What plug do I use to plug the tuner into it? The house
is normal AC current wiring.
Patt



Mark D. Zacharias July 4th 07 11:56 PM

akai amp
 
Patt wrote:
On the back of this amp (Akai AM-V04), is two plugins. One says
switched the other unswitched. What plug do I use to plug the tuner
into it? The house is normal AC current wiring.
Patt


"Switched" just means that particular outlet is controlled by the power
switch on the Akai, so that the Akai can turn on the tuner at the same time,
if you desire.
(Assuming the tuner power switch is "On", that is...)

Use either one, but the tuner will stay on when you turn off the amp unless
you use the switched outlet.

How about that... a question even I was competent to answer... ;-)


Mark Z.



Mike Berger July 5th 07 03:03 PM

akai amp
 
The unswitched outlet is meant for a turntable, which might need
power to unload the tone arm after the amp is turned off.

Patt wrote:
On the back of this amp (Akai AM-V04), is two plugins. One says switched the
other unswitched. What plug do I use to plug the tuner into it? The house
is normal AC current wiring.
Patt




All times are GMT +1. The time now is 09:16 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter