Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Tuning Mitsubishi CT-2153STX
Hi
We have a Mitsubishi CT-2153STX that was working fine, until our friend's child pushed a button on the front(maybe?). Now it just has white noise (fuzz) and says "28:........ AFT ON UHF )))))))))))))))))......................" We have tried pushing the buttons on the front -there are two rows of 7 with no labels. The words change on the screen, but it doesn't seem to tune it or make any difference. We don't have remote or a manual for it (can't find a manual for free on the internet and am loathe to buy one), does anyone know what the problem might be? thanks loads, z |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Tuning Mitsubishi CT-2153STX
I can't be totally specific, but when **** like that happens generally
you unplug it to let it reset. But then some sets will have a battery backup, and that could be the problem. You can remove the battery and it'll most likely be fine, but you will lose all presets whenever the set is unplugged. It is also likely to be soldered in. Problem I have with lithium batteries is getting a good one. I have been shipped so many bad ones that now I just wire in a couple of triple A batteries. JURB |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tuning Dados | Woodworking | |||
Tuning a tv | UK diy | |||
Tuning a plane | Woodworking | |||
Tuning slugs | Electronics Repair | |||
A: Bandsaw tuning | Woodworking |