Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
I keep having this problem even after i cleaned the heads. The
cassette will not play or even rewind. I put a cassette in and it starts for a couple seconds and then stops. Even if i try to FF or RW it will not move. When i eject the cassette some of the tape has been pulled out of the case. Only about 2-3 inches of the tape is pulled out. It never breaks the tape or makes in unuseable. This used to happen every once in a while but now it happens every time. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
VCR will not eject tape (Sony SLV-M91HF) | Electronics Repair | |||
Sony SLV-900HF VCR | Electronics Repair | |||
SLV 555 Sony VCR!! | Electronics Repair | |||
Sony SLV-770HF VCR - tape loading but not playing | Electronics Repair | |||
sony vcr slv-se727 | Electronics Repair |