Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
I keep having this problem even after i cleaned the heads. The
cassette will not play or even rewind. I put a cassette in and it starts for a couple seconds and then stops. Even if i try to FF or RW it will not move. When i eject the cassette some of the tape has been pulled out of the case. Only about 2-3 inches of the tape is pulled out. It never breaks the tape or makes in unuseable. This used to happen every once in a while but now it happens every time. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
The transport mechanism is stalling on load, and failing to completely
de-spool on abort. JR wrote: I keep having this problem even after i cleaned the heads. The cassette will not play or even rewind. I put a cassette in and it starts for a couple seconds and then stops. Even if i try to FF or RW it will not move. When i eject the cassette some of the tape has been pulled out of the case. Only about 2-3 inches of the tape is pulled out. It never breaks the tape or makes in unuseable. This used to happen every once in a while but now it happens every time. -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
|
#4
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
Where should i look for this part?
thx |
#5
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
The half load arm gets stuck, due to the grease drying up! Mark it's
exact location, remove, regrease, & adjust it back to it's proper height. Look here! Dani. http://www.fixer.com/dbase/in/so5.l.html |
#6
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
What kind of grease do i use? Is there a special kind?
On Apr 17, 11:41 am, Dani wrote: The half load arm gets stuck, due to the grease drying up! Mark it's exact location, remove, regrease, & adjust it back to it's proper height. Look here! Dani. http://www.fixer.com/dbase/in/so5.l.html |
#7
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
d2:
The type of grease you use is not very critical..... the problem is that the old grease congealed and now the arm is frozen or stiff. Once you get the arm to move freely, even an oil lubricant will work. A very light grease would be good but again this is not critical.... just get the arm to move freely. Hopefully the arm is not bent or gear teeth are not stripped. Be certain that you get the height exactly right once the arm is reinstalled. Measure carefully before removing it. electricitym On Apr 21, 6:57 am, " wrote: What kind of grease do i use? Is there a special kind? On Apr 17, 11:41 am, Dani wrote: The half load arm gets stuck, due to the grease drying up! Mark it's exact location, remove, regrease, & adjust it back to it's proper height. Look here! Dani. http://www.fixer.com/dbase/in/so5.l.html- Hide quoted text - - Show quoted text - |
#8
Posted to sci.electronics.repair
|
|||
|
|||
Sony VCR SLV-920HF Tape getting pulled out
I greased it up and the first tape seems to work fine. Thx, everyone.
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
VCR will not eject tape (Sony SLV-M91HF) | Electronics Repair | |||
Sony SLV-900HF VCR | Electronics Repair | |||
SLV 555 Sony VCR!! | Electronics Repair | |||
Sony SLV-770HF VCR - tape loading but not playing | Electronics Repair | |||
sony vcr slv-se727 | Electronics Repair |