Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
Does anyone have any troubleshooting documentation
for this precision 10MHz osc? My unit appears to be AM modulating around 30 KHz. If anyone has the service manual for this I could sure use some help... thanks Jim WB5kye |
#2
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
"Jim Flanagan" wrote in message
... Does anyone have any troubleshooting documentation for this precision 10MHz osc? My unit appears to be AM modulating around 30 KHz. If anyone has the service manual for this I could sure use some help... thanks Jim WB5kye Assuming that the model number in the subject line is a typo, and should really be 10554A, there is a bit of info available. This oscillator and its successor, the 10811 were the mainstay of the HP Z3801A GPS frequency standard that was used by many cell phone systems. Take a stroll through the K8CU web site at http://www.realhamradio.com/GPS_Frequency_Standard.htm. He has a great page on the 10811, including a tutorial on getting into the main oven, where all the good stuff lives. The 10811 is the same as the 10554 in most respects. You can download the schematic for the 10544A at http://www.leapsecond.com/museum/10544/10544-3.gif Download a copy of the 10811 manual from http://www.hparchive.com/ -- Dave M MasonDG44 at comcast dot net (Just substitute the appropriate characters in the address) Life is like a roll of toilet paper; the closer to the end, the faster it goes. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Simple Oscillator | Electronics | |||
Attempting audio amp (Pioneer A-9) repair - any tips? | Electronics Repair | |||
Oscillator stops when probed. | Electronics Repair | |||
Crystal oscillator needed | Metalworking | |||
HP 651B oscillator motorboating | Electronics Repair |