DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Attempting to repair HP5044A Oscillator (https://www.diybanter.com/electronics-repair/194668-attempting-repair-hp5044a-oscillator.html)

Jim Flanagan March 10th 07 10:28 PM

Attempting to repair HP5044A Oscillator
 
Does anyone have any troubleshooting documentation
for this precision 10MHz osc? My unit appears to be
AM modulating around 30 KHz. If anyone has the
service manual for this I could sure use some
help...
thanks
Jim
WB5kye

DaveM March 11th 07 12:38 AM

Attempting to repair HP5044A Oscillator
 
"Jim Flanagan" wrote in message
...
Does anyone have any troubleshooting documentation
for this precision 10MHz osc? My unit appears to be
AM modulating around 30 KHz. If anyone has the
service manual for this I could sure use some
help...
thanks
Jim
WB5kye



Assuming that the model number in the subject line is a typo, and should really
be 10554A, there is a bit of info available. This oscillator and its successor,
the 10811 were the mainstay of the HP Z3801A GPS frequency standard that was
used by many cell phone systems. Take a stroll through the K8CU web site at
http://www.realhamradio.com/GPS_Frequency_Standard.htm. He has a great page on
the 10811, including a tutorial on getting into the main oven, where all the
good stuff lives. The 10811 is the same as the 10554 in most respects.

You can download the schematic for the 10544A at
http://www.leapsecond.com/museum/10544/10544-3.gif

Download a copy of the 10811 manual from http://www.hparchive.com/


--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Life is like a roll of toilet paper; the closer to the end, the faster it goes.




All times are GMT +1. The time now is 07:52 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter