DTS-42 Plasma (Daewoo) - seeking advice -lines in display
I brought this set in reluctantly, and this being my
first plasma ever, was hoping to get a few pointers from the seasoned experts. Here is what I'm working with: http://webpages.charter.net/rumi2/daewooplasma.jpg The lines are more populated at the left and decrease toward the right. Lines are OVER picture and OSD. Checked all connections and everything appears okay. The service manual offers no schematics or useable troubleshooting guides (for this situation). Can anyone help me out? What sort of availability is there with replacement parts for Daewoos? Thanks a million, Al |
DTS-42 Plasma (Daewoo) - seeking advice -lines in display
On Feb 23, 11:06 pm, "427Cobraman" wrote:
I brought this set in reluctantly, and this being my first plasma ever, was hoping to get a few pointers from the seasoned experts. Here is what I'm working with:http://webpages.charter.net/rumi2/daewooplasma.jpg The lines are more populated at the left and decrease toward the right. Lines are OVER picture and OSD. Checked all connections and everything appears okay. The service manual offers no schematics or useable troubleshooting guides (for this situation). Can anyone help me out? What sort of availability is there with replacement parts for Daewoos? Thanks a million, Al Failure is most likely the matrix driver ICs which are part of the plasma panel. Pretty much time to scrap the unit out. |
DTS-42 Plasma (Daewoo) - seeking advice -lines in display
On 23 Feb 2007 20:06:48 -0800, "427Cobraman"
wrote: I brought this set in reluctantly, and this being my first plasma ever, was hoping to get a few pointers from the seasoned experts. Here is what I'm working with: http://webpages.charter.net/rumi2/daewooplasma.jpg The lines are more populated at the left and decrease toward the right. Lines are OVER picture and OSD. Checked all connections and everything appears okay. The service manual offers no schematics or useable troubleshooting guides (for this situation). Can anyone help me out? What sort of availability is there with replacement parts for Daewoos? Looks like panel drivers are dying. The drivers are integrated in the panel, which means throw it away. |
DTS-42 Plasma (Daewoo) - seeking advice -lines in display
On Feb 24, 10:23 am, Ole Geisler wrote:
On 23 Feb 2007 20:06:48 -0800, "427Cobraman" wrote: I brought this set in reluctantly, and this being my first plasma ever, was hoping to get a few pointers from the seasoned experts. Here is what I'm working with: http://webpages.charter.net/rumi2/daewooplasma.jpg The lines are more populated at the left and decrease toward the right. Lines are OVER picture and OSD. Checked all connections and everything appears okay. The service manual offers no schematics or useable troubleshooting guides (for this situation). Can anyone help me out? What sort of availability is there with replacement parts for Daewoos? Looks like panel drivers are dying. The drivers are integrated in the panel, which means throw it away.- Hide quoted text - - Show quoted text - Not what I was hoping to hear. If they are integrated into the panel, what are the boards with edge-ribbon type connectors that are at the top and sides of the panel? They have several IC's on them. I believe they are referred to as "relay" boards (top, bottom, left, and right). Thanks, Al |
All times are GMT +1. The time now is 09:28 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter