2004 Pioneer Elite receiver. Standby power only, responds to power switch
with steady LED for a couple of seconds, but goes back to flashing. All
fuses found are OK, no activity on relay drive. Forcing the main relay
brings up supplies but no display, no control, no output.

Any manuals or tips would be appreciated.

Thanks.

Leonard

Leonard Caillouet wrote:
2004 Pioneer Elite receiver. Standby power only, responds to power
switch with steady LED for a couple of seconds, but goes back to
flashing. All fuses found are OK, no activity on relay drive. Forcing the
main relay brings up supplies but no display, no control,
no output.
Any manuals or tips would be appreciated.

Thanks.

Leonard

Here's a tip I found.

Mark Z.

Symptom: Dead. Standby Lite flashes.
Cu Reset by holding down 'Stereo Direct' and "Stream Direct' key for more
than 2 sec.
Models Covered: VSX54TX, VSX56TXI
Tip Date: August 21 2006
The Tech Name: Hugh Gordon