 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Guitar amp input socket replacement
I am trying to locate a 1/4" TRS input socket replacement for a Hohner
Panther Tega-10 guitar amp. I have removed the damaged one by melting the 4 solder points where the narrow pins at the end of each leg fix into the circuit board. These are spaced 16mm apart (measuring side to side across the amp) and 13mm apart (measuring from front to back, i.e. in line with the jack). The height of the centre of the jack to the surface of the circuit board is 11mm. Can anyone please suggest where I might find one? MilesG (UK resident) |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Crate BV120H guitar amp, probably 1991 | Electronics Repair | |||
| Chimney Cap Replacement - Input & comments | Home Repair | |||
| Help with Univox Guitar Amp | Electronics Repair | |||
| Preamp problems on a guitar amp | Electronics Repair | |||
| Dodgy JVC RGB SCART socket input | Electronics Repair | |||
Threaded Mode
