I have a one time top of the range Panasonic NV-HD670 VCR that won't eject a tape and just sits
there displaying an F05 error code.

Any ideas as to the cause and whether it is worth repairing?

Thanks

ha escrito:

I have a one time top of the range Panasonic NV-HD670 VCR that won't eject a tape and just sits
there displaying an F05 error code.

Any ideas as to the cause and whether it is worth repairing?

Thanks

F95 =LOSS OF REEL DRIVE.
could be a belt or something more serious.
databse says also: no menus, test sig & "F05" displayed when tape
inserted Q1002 2SD1996STTA 5v reg in psu

I'd start by checking the belt
In any case, top end vcrs are worth hanging on or having repaired if
they've not had lots of wear, to as well built ones are impossible to
find nowadays.
-B.

wrote in message
...
I have a one time top of the range Panasonic NV-HD670 VCR that won't eject
a tape and just sits
there displaying an F05 error code.

Any ideas as to the cause and whether it is worth repairing?

Thanks


NV HD600 and 610 manual shows F05 to be tape not wound back into cassette

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

b ha escrito:

F95 =LOSS OF REEL DRIVE.

sorry, a typo: I meant F05 as in original post