DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Marshall AVT150 (https://www.diybanter.com/electronics-repair/181293-marshall-avt150.html)

Raged November 2nd 06 05:57 PM

Marshall AVT150
 
Hi. Just wondering if anybody has dealt with one of these. The
power output chips keep blowing on it so I assume that I should
start looking for the fault on the power supply board. The only
problem is, I have no circuit diagram for it. Could anyone point
the area I should be looking at. Any help would be very gratefully
accepted.

Ant

----------------------------------------------
Posted with NewsLeecher v1.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------


Jim Land November 2nd 06 06:25 PM

Marshall AVT150
 
(Raged) wrote in news:ukq2h.147446$3D1.29167
@fe3.news.blueyonder.co.uk:

I have no circuit diagram for it.


http://www.schematicconnection.com says they will sell you the schematic
for $10.


All times are GMT +1. The time now is 05:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter