Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1
Default Packard Bell Tft Monitor FT500 Problem


I have a problem with monitor as follows:
When switched on at mains - on/off green indicator light cycles on for
5secs then off for 1.5 secs then repeats sequence for as long as power
is applied.
The screen remains black except for slight flicker initially.
The PSU and Inverter pcb is a Frontek FLF 1542-02A and although this
looks OK from a visual inspection (no burnt components etc) so wonder
if there are any other checks that anyone can suggest - bearing in mind
that this is a home cure job not workshop.
The monitor is a 2003 model with Part No 6901830000

Probably easier to bin it and get a new one - but theres no challenge
in that.
Stuart2z9sl (Gloucestershire - UK)


--
stuart2z9sl
------------------------------------------------------------------------
stuart2z9sl's Profile: http://www.futurehardware.in/member.php?userid=176
View this thread: http://www.futurehardware.in/showthread.php?t=547628

Future Hardware - http://www.futurehardware.in

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
packard bell laptop no display conundrum Electronics Repair 1 June 29th 06 06:55 PM
Packard Bell A720 stuck on "Soft power down" mode ? Aslaner Electronics Repair 0 October 11th 04 10:23 PM
Help needed: Packard Bell A720 HYundai FCCID CKLA720 Aslaner Electronics Repair 0 October 5th 04 11:05 PM
Packard Bell 1412sl schematics needed Sagus Electronics Repair 0 September 30th 04 07:36 PM
Problem with retrace lines on EIZO F55S... [email protected] Electronics Repair 2 October 20th 03 01:29 AM


All times are GMT +1. The time now is 04:58 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"