 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
solder temperature on rework station
I am just starting to play with a rework station that has both an iron and a
hot air handle. I am starting with basic 60/40 solder and need a starting point for the temperatures to set. Should I use the same temps for the iron as the air? Where should I start for mounting, removing or repairing both thru-hole and SMD devices? Thanks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Solder Pad Lifting--What To Do? | Electronics Repair | |||
| de-soldering IC's | Electronics Repair | |||
| hard versus soft solder | Metalworking | |||
| Brown's gas?? | Metalworking | |||
| ever ruin the PCB when changing ICs? | Electronics Repair | |||
Threaded Mode
