Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic TX-32DK2 32" widescreen TV: no sound from left speaker and red tint on black background
I've yet to open up the back of this TV but have noted two minor
problems whcih I'm hoping someone can provide me with some tips/ help: 1. Noticed the other day that there is no sound from the left speaker. The TV has at the back a RCA Right/ Left front speaker audio out to connect to a amp if you wanted to use alternate front speakers, the output volume level is controlled by the TV's volume control. (note it is not a balance issue!). I've tried this connection to an amp and I get both let and right channels so I assume the connection from internal amp is functional. I think the problem is probably a wire which has come adrift either from the speaker or from the board. However, could it be something else? 2. When the screen is not displaying any image i.e. a black image there is a red tint to the black. O this model of TV is it possible to adjust this out via the Service Menu and if so what are the settings? Alternative are there any manual settings on the board? Note: There is no RGB adjustment from the TV's Picture menu. Thanks Mark |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|