Sony Rear Projection KP51WS500 Problems Help!
Unit is 3 years old, suddenly wont stay on longer than 3 sec or so....standby switch blinks 8 times, Sony's online site codes say check IC406....I ordered online service manual, but it makes no reference to an IC406 I searched the entire pdf doc...mmmm, so I did a little digging in the SM, it says 8 blinks means a transformer on the D board is bad..... ...I'm thinking of ordering the d board for 139.00 and just plugging in. But I am confused by Sony's code blink descrepancy....anyone have any ideas?
Thanks, Mike Texas |
Sony Rear Projection KP51WS500 Problems Help!
Change the HV block...8-598-955-32
john "mknight52" wrote in message ... Unit is 3 years old, suddenly wont stay on longer than 3 sec or so....standby switch blinks 8 times, Sony's online site codes say check IC406....I ordered online service manual, but it makes no reference to an IC406 I searched the entire pdf doc...mmmm, so I did a little digging in the SM, it says 8 blinks means a transformer on the D board is bad..... ...I'm thinking of ordering the d board for 139.00 and just plugging in. But I am confused by Sony's code blink descrepancy....anyone have any ideas? Thanks, Mike Texas -- mknight52 |
Not the whole D board, just the HV block?
Mike Quote:
|
Sony Rear Projection KP51WS500 Problems Help!
Just the BLOCK...follow the HV lead from Fly to the BLOCK
it sits up a little .. john "mknight52" wrote in message ... Not the whole D board, just the HV block? Mike kip Wrote: Change the HV block...8-598-955-32 john "mknight52" wrote in message ...- Unit is 3 years old, suddenly wont stay on longer than 3 sec or so....standby switch blinks 8 times, Sony's online site codes say check IC406....I ordered online service manual, but it makes no reference to an IC406 I searched the entire pdf doc...mmmm, so I did a little digging in the SM, it says 8 blinks means a transformer on the D board is bad..... ...I'm thinking of ordering the d board for 139.00 and just plugging in. But I am confused by Sony's code blink descrepancy....anyone have any ideas? Thanks, Mike Texas -- mknight52 - -- mknight52 |
Sony Rear Projection KP51WS500 Problems Help!
Could be either the FBT or the HV block. Seen both. Test the transformer
and if it checks ok on both ringing and drive tests change the HV block. Could still be a flyback, as I have had them test ok but not run, but rarely. There is no discrepancy. The blink codes just get you in the ballpark and provide a starting point for troubleshooting. They are not a symptom-fix database. Leonard "mknight52" wrote in message ... Unit is 3 years old, suddenly wont stay on longer than 3 sec or so....standby switch blinks 8 times, Sony's online site codes say check IC406....I ordered online service manual, but it makes no reference to an IC406 I searched the entire pdf doc...mmmm, so I did a little digging in the SM, it says 8 blinks means a transformer on the D board is bad..... ...I'm thinking of ordering the d board for 139.00 and just plugging in. But I am confused by Sony's code blink descrepancy....anyone have any ideas? Thanks, Mike Texas -- mknight52 -------------------------------------------------------------------------------- I am using the free version of SPAMfighter for private users. It has removed 7512 spam emails to date. Paying users do not have this message in their emails. Try SPAMfighter for free now! |
All times are GMT +1. The time now is 06:09 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter