Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
HK PM 655 problem with right channel
I have a Harman Kardon PM 955 and the right channel is working
intermittently. It works ok when first turned on, then after awhile it starts to cut out and then quits working all together. My question is this, would this be hard to diagnose/repair for a novice? I consider myself mechanically inclined and I'm willing to attempt the repair if it's not overly complex. Secondly, if this requires more expertise will it require genuine HK parts that may not be available (the unit is approximately 20 years old) or could this be repaired with generic electronic components? Thanks in advance, Mark |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
problem with triacs with neon transformer loads | Electronics Repair | |||
The Woodworking Channel | Woodworking | |||
Intermittent static when viewing cable, cable ready problem? | Electronics Repair | |||
Intermittent static when viewing cable, cable ready problem? | Home Repair | |||
Powermatic 64A Alignment Problem | Woodworking |