Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
old X-10 controller/ need help
Hello....
I have the CP290 controller that I lost the serial cable to interface with the PC. This standalone unit was programmable, except for the cable now gone. I looked at the X-10 site, and saw nothing of any help. I was hoping someone knows where I could either buy the ready-made cord, or know the pins out/in on either end. I remember the 9-pin was on one end, and a 5 pin DIN was the other. Thanks Les |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
3-wire submersible pump controller specs | Home Repair | |||
Maxtor disk failed. Controller replacement? | Electronics Repair | |||
UPDATE: Hard Disk Drive Controller Error Message | Electronics Repair | |||
Controller for handheld scanner | Electronics | |||
FF/FS: Hot water cylinder+immersion, heating pump, 7-day heating controller | UK diy |