Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
I have someone trying to collect aluminum for recycling and he is
asking me if this is aluminum or not? If I tell him that whenever a magnet does not stick to metal, it is aluminum? At least with a 95% accuracy for junk around a farm? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
PS
there are a couple of japanese junked cars, are the so called aluminum head really aluminum? he could recycle them for some change. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
In article om,
NN wrote: there are a couple of japanese junked cars, are the so called aluminum head really aluminum? he could recycle them for some change. Ordinary car cylinder heads if not cast iron are likely to be aluminium alloy. -- *Honk if you love peace and quiet* Dave Plowman London SW To e-mail, change noise into sound. |
#4
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
"NN" wrote in message oups.com... I have someone trying to collect aluminum for recycling and he is asking me if this is aluminum or not? If I tell him that whenever a magnet does not stick to metal, it is aluminum? At least with a 95% accuracy for junk around a farm? Purt nigh. It won't be magnesium. OTOH if there's a 'nuclear' symbol on the outside all bets are off. |
#5
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
Copper, tin, lead, and other metals are non-magnetic and so are many alloys
such as "stainless steel." Also, metals such as nickel are only weakly magnetic. |
#6
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
In article ,
"Charles Schuler" wrote: Copper, tin, lead, and other metals are non-magnetic and so are many alloys such as "stainless steel." Also, metals such as nickel are only weakly magnetic. Canadian nickels used to be about 95% pure nickel and they stuck to magnets just fine. Isaac |
#7
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
"isw" wrote in message ... In article , "Charles Schuler" wrote: Copper, tin, lead, and other metals are non-magnetic and so are many alloys such as "stainless steel." Also, metals such as nickel are only weakly magnetic. Canadian nickels used to be about 95% pure nickel and they stuck to magnets just fine. Still are and do. |
#8
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
"Charles Schuler" wrote in message . .. Copper, tin, lead, and other metals are non-magnetic and so are many alloys such as "stainless steel." Also, metals such as nickel are only weakly magnetic. Ally is soft, so gouges easily, light, white, non-magnetic, has a dull sound when you hit it, and won't solder to with regular solder. Old ally will usually sport some white powdery oxide corrosion, and exposed surfaces may well have characteristic pock marked surfaces. If the scrap is painted, or has not been exposed to the elements, then its a lot harder to tell. There's not much scrap pure ally out there, because it's not a very useful metal. It fatigues easily and is generally not very strong or resistant to deformation, and is too soft. It can be made a lot more useful by alloying it with other metals, which I guess does affect scrap value, as the wanted ally would have to be seperated out from the other metals. Arfa |
#9
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
Arfa Daily wrote: "Charles Schuler" wrote in message . .. Copper, tin, lead, and other metals are non-magnetic and so are many alloys such as "stainless steel." Also, metals such as nickel are only weakly magnetic. Ally is soft, so gouges easily, light, white, non-magnetic, has a dull sound when you hit it, and won't solder to with regular solder. Old ally will usually sport some white powdery oxide corrosion, and exposed surfaces may well have characteristic pock marked surfaces. If the scrap is painted, or has not been exposed to the elements, then its a lot harder to tell. There's not much scrap pure ally out there, because it's not a very useful metal. It fatigues easily and is generally not very strong or resistant to deformation, and is too soft. It can be made a lot more useful by alloying it with other metals, which I guess does affect scrap value, as the wanted ally would have to be seperated out from the other metals. Arfa There are a lot of alloys out there as you said, lead and copper is easily identified without a magnet. The alloys don,t rust but do what you described. Some are much stronger than others yet slightly brittle. I saw a alloy once that melted before lead did. I guess one has to take another approach and ask the recycler if alloys are a issue. |
#10
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
"NN" wrote in message ps.com... Arfa Daily wrote: "Charles Schuler" wrote in message . .. Copper, tin, lead, and other metals are non-magnetic and so are many alloys such as "stainless steel." Also, metals such as nickel are only weakly magnetic. Ally is soft, so gouges easily, light, white, non-magnetic, has a dull sound when you hit it, and won't solder to with regular solder. Old ally will usually sport some white powdery oxide corrosion, and exposed surfaces may well have characteristic pock marked surfaces. If the scrap is painted, or has not been exposed to the elements, then its a lot harder to tell. There's not much scrap pure ally out there, because it's not a very useful metal. It fatigues easily and is generally not very strong or resistant to deformation, and is too soft. It can be made a lot more useful by alloying it with other metals, which I guess does affect scrap value, as the wanted ally would have to be seperated out from the other metals. Arfa There are a lot of alloys out there as you said, lead and copper is easily identified without a magnet. The alloys don,t rust but do what you described. Some are much stronger than others yet slightly brittle. I saw a alloy once that melted before lead did. I guess one has to take another approach and ask the recycler if alloys are a issue. I've seen this stuff too. I think it's called Wood's Metal. I don't know what actual metals make up the alloy though. Two places I know that they use it are as the safety plug in a pressure cooker lid, and as the hold-off bar in fire sprinkler systems, both cases where a very low melting temperature is required. Arfa |
#11
Posted to sci.electronics.repair
|
|||
|
|||
aluminum or not? simple method to tell?
"Arfa Daily" wrote in message ... I've seen this stuff too. I think it's called Wood's Metal. I don't know what actual metals make up the alloy though. Two places I know that they use it are as the safety plug in a pressure cooker lid, and as the hold-off bar in fire sprinkler systems, both cases where a very low melting temperature is required. IIRC it's also used for some molding processes - and in the toy "Metal Molder". |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cutting aluminum with carbide wood cutting blade on tablesaw | Metalworking | |||
Cutting aluminum with carbide wood cutting blade on tablesaw | Woodworking | |||
Easiest/Cheapest/Reusable Metal Casting Method? | Metalworking | |||
Aluminum wiring issue | Home Repair |