41" Sony projection tv
model:KP-41EXR96,chassis:SCC-F23C-A,chassis:AP,year:Oct 1993,turns on
for 1 second then constant standby blinking LED until I press the power
button again.I disconnected the HV cable going into splitter and still
I also rang the T803=flyback # 1-439-521-11 because it has this fuzz
noise and it was fine using this method:

I ring flyback,SMPS's x-fmers,video heads,yokes and other x-fmrs using
the calibration output of my TEK465 and two 0.1Uf poly caps:

http://www.iwaynet.net/~nesda/flypoor.html
http://www.iwaynet.net/~nesda/Dec02/Dec021.html
http://www.iwaynet.net/~nesda/Dec02/Dec023.html

I need repair tips as I don't usually repair projection tv's and never
do service calls but this unit is light and the customer dropped it off
at my apartment.I am on slow dial up internet so cannot download or
view the service manuals which are usually in PDF:

http://www.schematicsforfree.com
http://www.schematicsforfree.mattsoft.net
http://schematicsforfree.mattsoft.net
http://schforfree.seedhost.com
http://www.epanorama.net/schematicsforfree

then click on "click here to see the files"

Sony common repair tips at:

http://www.orpheuscomputing.com/tech...downloads.html
http://www.moyerelectronics.com
http://intrepid-video.com/techhelp.htm
http://wa6ati.com

then click on "TSS logs for Sony".

So if anyone has any repair tips thanks in advance.

Sidney
E-mail:sidneybek(at)yahoo.com
Dartmouth,Nova scotia
Canada
http://forums.reality-check.ca/image...canadaflag.gif

http://canadiangunnutz.com/forum/ima...rs/canada1.jpg