Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
philips gr1ax chassis problems
Hi,
PHILIPS GR1AX CHASSIS. Set has standby light on when powerEd up from cold. it can be brought out of standby with remote, the LED goes out but set remains as before - 'dead' - there is no HV, deflection, audio etc. checked HOT - ok. with HOT removed, conencted bulb c-e - nothing. measured voltage c-e in standby and when 'on' - 0v. Don't have a schematic, have come to dead end, any ideas? cheers, B. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
philips gr1ax chassis problems
smps trouble ?
"b" wrote in message ps.com... Hi, PHILIPS GR1AX CHASSIS. Set has standby light on when powerEd up from cold. it can be brought out of standby with remote, the LED goes out but set remains as before - 'dead' - there is no HV, deflection, audio etc. checked HOT - ok. with HOT removed, conencted bulb c-e - nothing. measured voltage c-e in standby and when 'on' - 0v. Don't have a schematic, have come to dead end, any ideas? cheers, B. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Philips Flat Screen TV problems (UK) | Electronics Repair | |||
4 problems with my Panasonic TX-33V2X (M16M Chassis) | Electronics Repair | |||
Philips PM3055/Fluke PM3055 Scope, cold start problems. | Electronics Repair | |||
Dell 1028L monitor ( Philips CM6800 chassis) | Electronics Repair |