Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Lining up back of timex datalink 150 after battery replacement
Hi all,
I have changed the battery on my datalink 150, after about 6 years of service. I had replaced it once before that. Does somebody know how to line up the back properly so that the pizzo portion of the lid is in the right place. At the moment the alarm sound seems less intense than before, and the beeps I get when flashing the bar code off of the pc is lower in volume as well. There is a triangular pointer on the cover, but no matching mark on the case itself. Perhaps there is a different group for this subject. I appreciate any help I can get here, thank you. Cheers, Frank |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Battery life tests | Home Repair | |||
Replacement Wooden Back Door | UK diy | |||
Why Won't a Frozen Battery Start a Vehicle. | Electronics Repair | |||
Installed new battery backup for home alarm | UK diy | |||
Car Battery Tips | Home Repair |