Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
strimmer conked out
Hi. Before I chuck it in the bin I need to make sure this has no hope.
Using the strimmer today, not that old, not used all that much, it suddenly stopped. Changed the fuse. Thing is it seems dead but now and again when pressing the trigger, it spins for a second, specially when I plug it back in. Took it apart to make sure no weeds or threads were cought. checked to see that no elctric wires were loose. All seemed ok. If it's a blown engine, would it spin? Thanks for any advice |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New Pillar Drill Conked... | UK diy | |||
Strimmer | UK diy | |||
Electric strimmer recommendations wanted | UK diy | |||
Ryobi Strimmer? Clutch or no clutch? | UK diy | |||
McCulloch Strimmer Line | UK diy |