DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Christmas lights (https://www.diybanter.com/electronics-repair/163034-christmas-lights.html)

Your name May 23rd 06 09:46 PM

Christmas lights
 
Hi

Christmas lights wired in series

240 volt mains ac - 30 lights

what voltage does each bulb have to be?

any words of wisdom?

nvic May 23rd 06 09:56 PM

Christmas lights
 
I'd say 8 volts if put in series. Math: 240 / 30 = 8 Volts


David Nebenzahl May 23rd 06 10:13 PM

Christmas lights
 
Your name spake thus:

Christmas lights wired in series

240 volt mains ac - 30 lights

what voltage does each bulb have to be?

any words of wisdom?


Yes--simple arithmetic: 240/30. I leave the answer as an exercise for
the reader.


--
I hope that in a few years it [Wikipedia] will be so bloated that it
will simply disintegrate, because I can't stand the thought that this
thing might someday actually be used as a serious reference source.
Because in its current form, it's not to be taken seriously at all.

- Horst Prillinger (see
http://homepage.univie.ac.at/horst.p...06/000623.html)

Travis Jordan May 23rd 06 10:59 PM

Christmas lights
 
Your name wrote:
Hi

Christmas lights wired in series

240 volt mains ac - 30 lights

what voltage does each bulb have to be?

any words of wisdom?


Are they really in series? That is, when one goes out do they all go
out? Some light strings are series/parallel.



Adrian C May 23rd 06 11:38 PM

Christmas lights
 
Travis Jordan wrote:

Are they really in series? That is, when one goes out do they all go
out?


'I say, d'you know those olympic synchronised swimmers? If one drowns,
do they all drown?'

Some light strings are series/parallel.


Most 240V sets (UK anyway) are all in series, but each bulb is designed
to self-short if the filament fails - so the rest of the set remain
alight, though sharing now a higher voltage per bulb. Eventually, after
more bulb failures (due to overrun) the fuse bulb will blow and tommy
will get upset, bawl out tears, and santa will head seriously for the
drinks cupboard again.

What's 'Your name' worrying about Christmas for? It's more than six
months away!

--
Adrian C

Travis Jordan May 23rd 06 11:40 PM

Christmas lights
 
Adrian C wrote:
Eventually, after more bulb failures (due to overrun) the fuse bulb
will blow and tommy will get upset, bawl out tears, and santa will
head seriously for the drinks cupboard again.


Um, cocktail hour here in the states. Good idea.



James Sweet May 24th 06 03:27 AM

Christmas lights
 
Adrian C wrote:
Travis Jordan wrote:

Are they really in series? That is, when one goes out do they all go
out?



'I say, d'you know those olympic synchronised swimmers? If one drowns,
do they all drown?'

Some light strings are series/parallel.



Most 240V sets (UK anyway) are all in series, but each bulb is designed
to self-short if the filament fails - so the rest of the set remain
alight, though sharing now a higher voltage per bulb. Eventually, after
more bulb failures (due to overrun) the fuse bulb will blow and tommy
will get upset, bawl out tears, and santa will head seriously for the
drinks cupboard again.



Most everywhere else are too, though often the larger sets are segmented
with several smaller series sections.

I have one set of UK miniature lights which is very unusual from my
perspective as it has sections of 10 2.4v bulbs in series and runs from
a 24V transformer, that's something I've never seen on this side of the
pond.

JW May 24th 06 02:48 PM

Christmas lights
 
On Tue, 23 May 2006 14:13:18 -0700 David Nebenzahl
wrote in Message id:
:

Your name spake thus:

Christmas lights wired in series

240 volt mains ac - 30 lights

what voltage does each bulb have to be?

any words of wisdom?


Yes--simple arithmetic: 240/30. I leave the answer as an exercise for
the reader.


Can you give me a little hint?

Ken Weitzel May 25th 06 11:14 PM

Christmas lights
 


JW wrote:
On Tue, 23 May 2006 14:13:18 -0700 David Nebenzahl
wrote in Message id:
:


Your name spake thus:


Christmas lights wired in series

240 volt mains ac - 30 lights

what voltage does each bulb have to be?

any words of wisdom?


Yes--simple arithmetic: 240/30. I leave the answer as an exercise for
the reader.



Can you give me a little hint?


I'd give you a hint, but I'm getting a little old, and don't
understand this new math, so....

I'm pretty sure that these youngsters today got one part
wrong. They keep saying pie are square, and that's just
not right! Even us old guys know that pie are round,
it's cake that square!

Take care.

Ken



All times are GMT +1. The time now is 07:31 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter