I am working on a Toshiba CZ32V61 TV. When the unit is running the
power light blinks on and off untill you shut it off. the HV, horizontal,
and voltages are all there,all resistors are good, but there is no pic and
no sound? There is no OSD either, all three guns are lit. Is there anyone
that can give me some help with were to look next!! It is so wierd it is
like only half the TV is working.

Karen Ray-Stewart wrote:
I am working on a Toshiba CZ32V61 TV. When the unit is running the
power light blinks on and off untill you shut it off. the HV, horizontal,
and voltages are all there,all resistors are good, but there is no pic and
no sound? There is no OSD either, all three guns are lit. Is there anyone
that can give me some help with were to look next!! It is so wierd it is
like only half the TV is working.

Are all the main power supply and scan derived voltages present and
clean?
Are all the voltages off the regulators present and correct?
Are all the clock and data lines good with good clean data at correct
voltage?

Is the system control and jungle ic seeing everything they need?
i.e. h-sync, v-sync, 60hz ac, reset, etc.

Start with measuring to check those questions and you will probably
find the problem.