wiring joint question
 

Got a 12ga wire running along under a panel in a hard to get to place. With
great efforts and contortions, I can reach it to cut it and strip insulation
of the cut ends.

What I need to do is rejoin the cut ends, and come off with an additional
wire to go to a different location.

If there's slack, I can put the three ends together and use a wire nut.

Assuming there isn't enough slack for the wire nut trick, are there any neat
little critters out there for this specific purpose? What are they called?
Who has 'em?

wiring joint question
 

The wire nut spice has to be in a (grounded) junction box, outlet box or
switch box or other electrical box.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"RB" wrote in message
...
Got a 12ga wire running along under a panel in a hard to get to place.
With
great efforts and contortions, I can reach it to cut it and strip
insulation
of the cut ends.

What I need to do is rejoin the cut ends, and come off with an additional
wire to go to a different location.

If there's slack, I can put the three ends together and use a wire nut.

Assuming there isn't enough slack for the wire nut trick, are there any
neat
little critters out there for this specific purpose? What are they
called?
Who has 'em?

wiring joint question
 

Hello, RB!
You wrote on Mon, 3 Apr 2006 16:02:41 -0500:

R Got a 12ga wire running along under a panel in a hard to get to
R place. With
R great efforts and contortions, I can reach it to cut it and strip
R insulation
R of the cut ends.

R What I need to do is rejoin the cut ends, and come off with an
R additional
R wire to go to a different location.

R If there's slack, I can put the three ends together and use a wire
R nut.

R Assuming there isn't enough slack for the wire nut trick, are there
R any neat
R little critters out there for this specific purpose? What are they
R called?
R Who has 'em?



Is this mains wiring? search google for junction box!



With best regards, 3T39. E-mail:

wiring joint question
 

"RB" wrote in message
...
Got a 12ga wire running along under a panel in a hard to get to place.
With
great efforts and contortions, I can reach it to cut it and strip
insulation
of the cut ends.

What I need to do is rejoin the cut ends, and come off with an additional
wire to go to a different location.

If there's slack, I can put the three ends together and use a wire nut.

Assuming there isn't enough slack for the wire nut trick, are there any
neat
little critters out there for this specific purpose? What are they
called?
They're called electricians. Call one before you burn your house down.

wiring joint question
 

"RB" wrote in message
...
Got a 12ga wire running along under a panel in a hard to get to place.
With great efforts and contortions, I can reach it to cut it and strip
insulation of the cut ends.

What I need to do is rejoin the cut ends, and come off with an additional
wire to go to a different location.

If there's slack, I can put the three ends together and use a wire nut.

Assuming there isn't enough slack for the wire nut trick, are there any
neat little critters out there for this specific purpose? What are they
called? Who has 'em?

You can get some neat butt-splice connectors that don't even need you to cut
the wire. They have knife blade contacts that cut through the insulation. I
think they were originally created for use in automotive electrical systems,
so are probably only specced for low voltage, but probably worth looking at.
Try

http://www.tessco.com/products/displ...&subgroupId=24

where there's a few different types listed - look halfway down under "
splice connectors ".

I seem to recall that 3M also make some gel-filled ones for more hostile
environments.

Arfa

wiring joint question
 

"RB" wrote in message
...
Got a 12ga wire running along under a panel in a hard to get to place.
With great efforts and contortions, I can reach it to cut it and strip
insulation of the cut ends.

What I need to do is rejoin the cut ends, and come off with an additional
wire to go to a different location.

If there's slack, I can put the three ends together and use a wire nut.

Assuming there isn't enough slack for the wire nut trick, are there any
neat little critters out there for this specific purpose? What are they
called? Who has 'em?
Where's the panel? In your car or truck running 12 volts? If so, there are
crimp-able connectors available at home supply, electric supply stores or
auto parts stores that sell that sort of thing. You can usually buy the
crimper and the connectors in a kit. I usually put "ring connectors" on each
wire and bolt them all up with a small nut and bolt. Then wrap it well with
electrical tape and heat shrink tubing (remember to slip the tubing on
before bolting and taping so you can slip it back over everything).

If it's 120 or 240 volt, then splicing is a really bad idea. Have a new line
run from the breaker panel by a licensed electrician.

wiring joint question
 

Great answers. Thanks.

wiring joint question
 

Arfa Daily wrote:
"RB" wrote in message
...
Got a 12ga wire running along under a panel in a hard to get to place.
With great efforts and contortions, I can reach it to cut it and strip
insulation of the cut ends.

What I need to do is rejoin the cut ends, and come off with an additional
wire to go to a different location.

If there's slack, I can put the three ends together and use a wire nut.

Assuming there isn't enough slack for the wire nut trick, are there any
neat little critters out there for this specific purpose? What are they
called? Who has 'em?

You can get some neat butt-splice connectors that don't even need you to cut
the wire. They have knife blade contacts that cut through the insulation. I
think they were originally created for use in automotive electrical systems,
so are probably only specced for low voltage, but probably worth looking at.
Try

http://www.tessco.com/products/displ...&subgroupId=24

where there's a few different types listed - look halfway down under "
splice connectors ".

I seem to recall that 3M also make some gel-filled ones for more hostile
environments.

Arfa


Absolution do not use knife blade for 12 gauge!! I even dislike them
for automobile use. Sooner or later they fail.