Help Identify Part
What is this? The top of it seems to have blown off and I believe it is what
has been causing my intermiteant problems with my ipod. http://mikescomputers.homeip.net/DSC00346.JPG http://mikescomputers.homeip.net/DSC00345.JPG http://mikescomputers.homeip.net/DSC00344.JPG Any Help or Guesses would be great. - Mike |
Help Identify Part
Looks like a crystal resonator. The missing top, if it even had one,
was just a dust cover for the crystal. You probably need to send the ipod off for board level repair by the ipod people as that is the only option for an intermittent repair like that as zero repair parts are available to outside servicers or end users. |
Help Identify Part
If you can't find the lid, maybe someone that has
the same model can get you the info...Paul DUH! I have another ipod that works.. Should have done that in the first place.. I just checked it out and they are apparently different board rev. #'s but maybe they have the same crystal.. This picture is upside down in reference to the original ones. http://mikescomuters.homeip.net/DSC00347.JPG - Mike |
Help Identify Part
|
Help Identify Part
I see what they did on my working ipod board.. they have 2 crystals Y1 and
Y2.. the non working one has only Y1 but after looking carefully it has Y2 on the oppisite side.. I believe them to be the same but I didn't get the numbers off y2. - mike "Michael Kennedy" wrote in message . .. Correction to the URL http://mikescomputers.homeip.net/DSC00347.JPG - Mike |
Help Identify Part
Okay looking at both ipods right now... Y2 appears to be the same on both of
them.. They both are 32.768 (mhz I assume) but the model numbers under that are slightly different on each one KDS0243 and one KDS0160.. I'm just an ammature at this but I'd hazzard a guess that the Y1 on my working board is the same as Y1 on my non working board. So where would I find a smt crystal with the markings: 24.000 KDS 2K Thanks, Mike .. "Michael Kennedy" wrote in message ... I see what they did on my working ipod board.. they have 2 crystals Y1 and Y2.. the non working one has only Y1 but after looking carefully it has Y2 on the oppisite side.. I believe them to be the same but I didn't get the numbers off y2. - mike "Michael Kennedy" wrote in message . .. Correction to the URL http://mikescomputers.homeip.net/DSC00347.JPG - Mike |
Help Identify Part
I see what they did on my working ipod board.. they have 2 crystals Y1
and Y2.. the non working one has only Y1 but after looking carefully it has Y2 on the oppisite side.. I believe them to be the same but I didn't get the numbers off y2. - mike "Michael Kennedy" wrote in message . .. Correction to the URL http://mikescomputers.homeip.net/DSC00347.JPG - Mike |
Help Identify Part
I see what they did on my working ipod board.. they have 2 crystals Y1
and Y2.. the non working one has only Y1 but after looking carefully it has Y2 on the oppisite side.. I believe them to be the same but I didn't get the numbers off y2. - mike "Michael Kennedy" wrote in message . .. Correction to the URL http://mikescomputers.homeip.net/DSC00347.JPG - Mike |
Help Identify Part
On Tue, 28 Mar 2006 01:23:16 -0500, "Michael Kennedy"
put finger to keyboard and composed: Okay looking at both ipods right now... Y2 appears to be the same on both of them.. They both are 32.768 (mhz I assume) but the model numbers under that are slightly different on each one KDS0243 and one KDS0160.. It's probably a 32.768 kHz watch crystal. These are used for real-time clocks. I'm just an ammature at this but I'd hazzard a guess that the Y1 on my working board is the same as Y1 on my non working board. So where would I find a smt crystal with the markings: 24.000 KDS 2K 24.000 MHz. You might find one on an old hard drive. - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
All times are GMT +1. The time now is 01:08 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter