Sony KP-46WT510 Burnt Power Supply / High Voltage Board
Hello, This projection set is 18 months old (6 months out of warranty)
and belongs to my son's friend. He told me it burnt up and smoke came out. I went and found the board is burnt near the HOT and under a high voltage capacitor (maybe C8092).I cleaned up the board and fired it up and instantly flames came from the board. I didn't remove the board but it appears there is damage undernearth. I looked for coolant leaks and obvious signs of why this thing burnt and found none (including a Google search). Does anyone know if there is a problem with this set that may be covered under some silent warranty ? He is young and just spent $ 1800 on this 18 months ago. Should he call Sony and beg for a repair ???? The board has this number in blank ink on it (A-1302-180A) and silkscreened in white is (A-1405-140-A) on the upper part of the chassis were three numbers and this was the upper number (A-1604-504). Thanks in Advance, Kevin |
Sony KP-46WT510 Burnt Power Supply / High Voltage Board
Call Sony parts, and order a complete new board. This is the procedure.
The power supply and HV transformer must be verified before switching on with the new board. This is the reason why extended warrenties are recomended for these types of sets. Parts and modules are fairly expensive for this set. Jerry G. -- |
All times are GMT +1. The time now is 01:22 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter