Hello again,

I've got a Magnavox RH8524AK08 projection TV that went dead. I bought a set
of boards from an RH8520 from a guy on eBay. The power supply board
indicated in my service manual is the same for both sets (APW007). The
flyback is totally different on the set that I bought; my original has a
tube that comes out at an angle that the HV line slips into and a nut
tightens down. Since the set I bought came with the HV line and splitter, I
replaced the associated parts as well. The TV now comes on. I'm going to
replace the crt coolant before doing anything else. The other boards
(deflection, etc) are the same in both sets. The old flyback is part
362003-0005 which seems to be out of production. The new flyback is
362140-1. The replacement board has an outline on the PCB that matches the
old format.

Is this going to cause a problem? Given the age of the set, is it likely
the power supply was changed at some point? Also, where can I get
replacement crt seal kits so I can change the coolant?

Thanks for any help keeping this dinosoar alive...

Kirk S.