Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
rca 31
kipwrote:
HOT Horizontal Output Transistor . Maybe 3 ,but first you will most probably have to rebuild the SMPS. kip "whence" wrote in message ... On Mon, 27 Feb 2006 18:49:56 -0500, "kip" wrote: Yes change the Blue or Grey box caps in and around the HOT. That's if its got them as you have not given Model or Chassis Number so we are guessing. kip Oops sorry, model: F31226ES chassis: CTC169AU how many caps are we talkin about? And by 'around the hot' are you talkin about the real dangerous ones (if not properly discharged) around where the cord connects?[/quote:46f5c9d941] You don`t make sence. Why would he need to rebuild the smps ? All he most likely need to do is replace the blue caps and the diode near the Horizontal output like the other fellows was talking about. Thats if the flyback is good. He said he put sometype of goop on it at one point in time and what was the reason for doing so ? This flyback could also be his problem. So please let us know why was the reason for coatinng the flyback ? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
rca 31
"tvguy" wrote in message ... You don`t make sence. Why would he need to rebuild the smps ? All he most likely need to do is replace the blue caps and the diode near the Horizontal output like the other fellows was talking about. Thats if the flyback is good. He said he put sometype of goop on it at one point in time and what was the reason for doing so ? This flyback could also be his problem. So please let us know why was the reason for coatinng the flyback ? Makes perfect sense if you service the 169 chassis regularly. Anyone who does should know to test the caps on the regulator controller and the coupling cap to the chopper, as well as about a dozen other caps throughout the set. They are common enough failures that someone who does not have the right equipment to test them should just replace them if it has never been done before. Depending on the version, one should also inspect carefully for the "chocolate drop" problem, check the caps in the audio amp, check caps in the PIP module, and check for CRT coolant leakage and coolant contamination. Leonard |
#3
Posted to sci.electronics.repair
|
|||
|
|||
rca 31
well its pretty obvious that you have not repaired many 169,s.
kip "tvguy" wrote in message ... You don`t make sence. Why would he need to rebuild the smps ? All he most likely need to do is replace the blue caps and the diode near the Horizontal output like the other fellows was talking about. Thats if the flyback is good. He said he put sometype of goop on it at one point in time and what was the reason for doing so ? This flyback could also be his problem. So please let us know why was the reason for coatinng the flyback ? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|