Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
Hi!
This CTC177AA has good vedeo and sound channel 51 from there on up it is real snowy, took care of all the loose solder on the tunner,but it doesn't help.Open to all sugestions. Thank you. Vince. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
Troubleshoot the uhf section of the tuner, specifically the front end
rf amplifiers. Possibly while repairing the solder connections a solder bridge was caused or a nearby component damaged. Also possible that the eeprom is severely corrupted from failed solder connections and a full tuner alignment is in order per the service manual. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
Now you need the services of Mr Chipper and his friend Mr Genny.
"Vince" wrote in message news Hi! This CTC177AA has good vedeo and sound channel 51 from there on up it is real snowy, took care of all the loose solder on the tunner,but it doesn't help.Open to all sugestions. Thank you. Vince. |
#4
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
Mr Genny, yes.
Mr Chipper on a ctc177, probably not, can do it with the training manual and remote control. Tag001 tuner signal generator or equivalent 125 channel cable signal generator. No, cable tv signal is not good enough to do it right as the cable companies signal may be considerably off frequency and no way to control the signal strength. |
#5
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
Yes Mr Chipper on a 177 with modified clips.
wrote in message oups.com... Mr Genny, yes. Mr Chipper on a ctc177, probably not, can do it with the training manual and remote control. Tag001 tuner signal generator or equivalent 125 channel cable signal generator. No, cable tv signal is not good enough to do it right as the cable companies signal may be considerably off frequency and no way to control the signal strength. |
#6
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
On Mon, 9 Jan 2006 20:06:36 -0700, "Vince"
wrote: Hi! This CTC177AA has good vedeo and sound channel 51 from there on up it is real snowy, took care of all the loose solder on the tunner,but it doesn't help.Open to all sugestions. Thank you. Vince. It could be the mixer ic. Sony CX something. It is the ic that stands up in the tuner assembly. Chuck |
#7
Posted to sci.electronics.repair
|
|||
|
|||
RCA CTC177AA
---------------------------------------------------------------
Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- RCA CTC177 Tuning: Ch 50 On Up Snowy After Modifying Tuner Abctv Check R7147 Next To Casing. Solder Short R7147 To Grd --------------------------------------------------------------- RCA CTC177 Tuning Channel Above 51 Very Snowy Paul Deese Cet L7101 And L7102 Isolation Coupling Transformer For Rf Input Had Been Smashed Down When Rf Connector Replaced. Realign --------------------------------------------------------------- -- ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) ======================== "Vince" wrote in message news Hi! This CTC177AA has good vedeo and sound channel 51 from there on up it is real snowy, took care of all the loose solder on the tunner,but it doesn't help.Open to all sugestions. Thank you. Vince. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|