Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic question.
CT-27SX11CE 27" T.V., plug in, turn on, red screen, customer has
unit in service mode, & was way out of adjustment. After doing the main adjustments, to get it close to normal, Did the "reset", pressing the power, & action buttons on the front at the same time, now, all is fine, but the color level seems to be very non-linear, in the customer menu. Adjusting it, you get no color at minimum, then a low level of color, then it jumps, to a high level, & is too high. Which setting affects this? Thanks, dani. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Set Panasonic Camcorder Clock using FireWire, service manual, engineer? | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
Simple question regarding Ceiling tiles and sound? | Home Ownership | |||
ATT; Hobbyists and Repairmen I have accumulated a room of ICS, Transistors, Diodes , Mem Chips , Proms etc | Electronics Repair |