sharp component system - No output
Hi guys I have a sharp CD-DK4500 which has no output to the speakers
If you unplug it, and let it sit, then plug it in, it will work fine for maybe 10-15 seconds and then you hear a click inside the unit and the speakers stop. The click suggests to me something is shorting? And leaving it unplugged lets the short un-do itself? Or something, I dont know which is why im asking in here, any ideas? |
sharp component system - No output
wrote in message oups.com... Hi guys I have a sharp CD-DK4500 which has no output to the speakers If you unplug it, and let it sit, then plug it in, it will work fine for maybe 10-15 seconds and then you hear a click inside the unit and the speakers stop. The click suggests to me something is shorting? And leaving it unplugged lets the short un-do itself? Or something, I dont know which is why im asking in here, any ideas? The click is coming either from the standby relay, or the output relay, and indicates that the unit is either protecting itself - possibly from the effects of a defective speaker - or is protecting your speakers from a defect within itself. First move is to disconnect all speakers, and see if it stays powered then. Arfa |
sharp component system - No output
I unplugged the speakers and still hear the click after 10-15seconds
|
sharp component system - No output
wrote in message oups.com... I unplugged the speakers and still hear the click after 10-15seconds That being the case, unless you are an experienced engineer, with appropriate test equipment to determine exactly what the unit's system control * thinks * is going wrong, you are unlikely to get to the bottom of the problem, and it's probably time to take it to your local repairer. Sorry .... Arfa |
All times are GMT +1. The time now is 09:40 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter