 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
I have a problem with microcontroller (atmega128-16ac)
hi,friends
I have a device working with atmel microcontroller (atmega128-16ac) the connector of +3v battery of the microcontroller damaged isit possible that the programm is clear?if this occured what I could do. I try to conect another power supply but the alarm still going & I found that the piezo connected to the microcontroller & I feel some heat from the surface of the microcontroller when I connect the power cord thank you for any advice yar |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
| Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
| Problem with room getting too hot from facing the south (even in late October) | Home Repair | |||
| Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
| Toshiba vertical problem | Electronics Repair | |||
Linear Mode
