Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
help with panasonic 32" geometry
am i able to fix the vertical geometry while in the service mode? I am
able to access service mode but do no know which codes would need to be adjusted. There is a menu A, B, C, P, S, and X. Any help would be great. Thank you Jason Panasonic CT-32G6E - 2001 |
#2
Posted to sci.electronics.repair
|
|||
|
|||
help with panasonic 32" geometry
You have vertical size and centering available in the service mode on
that ultra low end model in Panasonics line. If the vertical geometry is actually off, then the vertical circuit needs repaired, probably failing capacitors. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
help with panasonic 32" geometry
" wrote in
oups.com: You have vertical size and centering available in the service mode on that ultra low end model in Panasonics line. If the vertical geometry is actually off, then the vertical circuit needs repaired, probably failing capacitors. do you happen to know what settings need to be alters to fize the vertacal size? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Panasonic TX-76PW150A geometry | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
ATT; Hobbyists and Repairmen I have accumulated a room of ICS, Transistors, Diodes , Mem Chips , Proms etc | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair |