Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
another power supply question.
Hello all, what are he reasons a SMPS blows a cap (on the secondary
side) 1 or 2 minutes after the PS is turned on? Anyone? thanks, Gary. |
#2
|
|||
|
|||
Overload !
"onyxx" wrote in message oups.com... Hello all, what are he reasons a SMPS blows a cap (on the secondary side) 1 or 2 minutes after the PS is turned on? Anyone? thanks, Gary. |
#3
|
|||
|
|||
"onyxx" wrote in news:1126889195.978931.277150
@z14g2000cwz.googlegroups.com: Hello all, what are he reasons a SMPS blows a cap (on the secondary side) 1 or 2 minutes after the PS is turned on? Anyone? thanks, Gary. you put it in backwards? ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#4
|
|||
|
|||
On 16 Sep 2005 09:46:36 -0700, "onyxx" wrote:
Hello all, what are he reasons a SMPS blows a cap (on the secondary side) 1 or 2 minutes after the PS is turned on? Anyone? thanks, Gary. Too much voltage on the capacitor, poor regulation...as kip said... Tom |
#5
|
|||
|
|||
In article .com,
onyxx wrote: Hello all, what are he reasons a SMPS blows a cap (on the secondary side) 1 or 2 minutes after the PS is turned on? You are using the correct grade of capacitor? 'Ordinary' ones won't do. -- *Not all men are annoying. Some are dead. Dave Plowman London SW To e-mail, change noise into sound. |
#6
|
|||
|
|||
me wrote:
"onyxx" wrote in news:1126889195.978931.277150 @z14g2000cwz.googlegroups.com: Hello all, what are he reasons a SMPS blows a cap (on the secondary side) 1 or 2 minutes after the PS is turned on? Anyone? thanks, Gary. you put it in backwards? ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- You beat me to it. That would be my first guess for a likely cause. -- The e-mail address in our reply-to line is reversed in an attempt to minimize spam. Our true address is of the form . |
#7
|
|||
|
|||
Check the forward converter FET`s, and strapping diodes(if any) or it
may keep happening. CJT wrote: me wrote: "onyxx" wrote in news:1126889195.978931.277150 @z14g2000cwz.googlegroups.com: Hello all, what are he reasons a SMPS blows a cap (on the secondary side) 1 or 2 minutes after the PS is turned on? Anyone? thanks, Gary. you put it in backwards? ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- You beat me to it. That would be my first guess for a likely cause. -- The e-mail address in our reply-to line is reversed in an attempt to minimize spam. Our true address is of the form . |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
NEC MultiSync LCD1700M Power Supply Problem | Electronics Repair | |||
Power supplies are burning out | Electronics Repair | |||
Switch mode power supply as a float charger | Electronics Repair | |||
testing ATX power supply | Electronics Repair | |||
Sony KV-2782R Power supply, and KV-2785R same. | Electronics Repair |