Hi all, i have a Broncsonik tv, when is plugged to the wall (120ac)i
get 127Vac at the end of the cable, inside the tv of course. The second
i turned the set on, the voltage drops to 83 volts, can any one tell me
why, what should i be looking for? I=B4ve check all components in the PS
area and everything SEEMS to be ok. Any ideas?.
Thnx.

Onyxx

onyxx wrote:

Hi all, i have a Broncsonik tv, when is plugged to the wall (120ac)i
get 127Vac at the end of the cable, inside the tv of course. The second
i turned the set on, the voltage drops to 83 volts, can any one tell me
why, what should i be looking for? I´ve check all components in the PS
area and everything SEEMS to be ok. Any ideas?.
Thnx.

Onyxx

bad wiring?

Is the voltage at the wall socket still 120V (nominal)?

Are you sure you're referencing to neutral and not safety ground
(setting aside for a moment the safety ramifications if they're
different by 20 volts)?

Be careful; I sense you may not be qualified for this kind of thing.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .

On 10 Sep 2005 10:39:01 -0700, "onyxx" wrote:

Hi all, i have a Broncsonik tv, when is plugged to the wall (120ac)i
get 127Vac at the end of the cable, inside the tv of course. The second
i turned the set on, the voltage drops to 83 volts, can any one tell me
why, what should i be looking for? I´ve check all components in the PS
area and everything SEEMS to be ok. Any ideas?.
Thnx.

Onyxx

Is the set working? If not, what other symptoms are present? If it is
working, the floating ground may be your apparent problem.

Tom

On 9/10/05 10:39 AM, in article
, "onyxx"
wrote:

Hi all, i have a Broncsonik tv, when is plugged to the wall (120ac)i
get 127Vac at the end of the cable, inside the tv of course. The second
i turned the set on, the voltage drops to 83 volts, can any one tell me
why, what should i be looking for? I´ve check all components in the PS
area and everything SEEMS to be ok. Any ideas?.
Thnx.

Onyxx


My first guess is that at the breaker/fuse box, the neutral connection to
the power ground has come loose. If this is the case, the voltage may be
high on some outlets and low on others, depending on what things are tuned
on or off. This could damage equipment and burn-out lamps.