27" JVC Model AV-27920
 

I've got a 27" JVC TV. The TV works ok, but there is about an inch of
space on the left hand side of the screen that does not display the
picture. It looks like the screen has moved slightly to the right.
Does anyone have any ideas where the problem might be?

Any help would be appreciated. Thanks!

Travis

In article , Comteck wrote:

I've got a 27" JVC TV. The TV works ok, but there is about an inch of
space on the left hand side of the screen that does not display the
picture. It looks like the screen has moved slightly to the right.
Does anyone have any ideas where the problem might be?

Could be a fault developing, or it could just need adjusting. the control
will labeled h-phase, or h position (or have a picture of a square
overlapping the side of another square) and if you're lucky it'll be
accessible from outside the TV - possibly using a philips head
screw-driver in the apropriattely labeled hole..

Bye.
Jasen

Since that set is completely digitally controlled for all adjustments,
it is highly unlikely any adjustment is going to fix the problem. You
have a parts failure that needs to be repaired. Could be in either the
h-deflection or video h-phase circuit.

Although possible, the eeprom could have become corrupted, in which
case the full chassis alignment will need performed after replacement
per the service manual.

Time to take it into a JVC experienced shop that has the service manual
and equipment on hand in order to complete a diagnosis and repair.